SWEEP (GRAPH MODE)
67
Setting bias
LCR-8200 Series offers DC BIAS ±12V. BIAS has a set value, when
the trigger test starts, DC BIAS will automatically turn on the output,
and the DC BIAS button indicator will light up; at the end of the test,
DC BIAS will automatically turn off and the light will be off.
When input is above the instrument voltage range will be displayed
“Out of range!”.
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then
press the SWEEP function button on
the right side of the LCD to enter the
[SWEEP DISPLAY] page.
2. Use arrow keys to move the cursor
and select BIAS item on the [SWEEP
DISPLAY] page.
3. Use the numeric keypad to enter the test dc
bias and unit.
To Next Page
Loading...
