GW Instek LCR Series - Setting speed

LCR-8000 Series User Manual
70
Setting speed
3 test speeds ( SLOW, MED., FAST). The slower the test, the more
accurate and stable the test result.
Steps
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then
press the SWEEP function button on
the right side of the LCD to enter the
[SWEEP DISPLAY] page.
2. Use arrow keys to move the cursor
and select SPEED item on the [SWEEP
DISPLAY] page.
3. Use option key on the right of the LCD screen
to select a speed mode for this sweep item.
Available test
speed
FAST
2.5ms (>10kHz)
MED.
50ms (>20Hz)
SLOW
100ms