LCR-8000 Series User Manual
92
Setting level
Test signal voltage/current level can be set (RMS value). The
voltage range is 10mV-2Vrms and current range is 0.1mA-
20mArms. 2Vrms can only be used at <= 1MHz..
1. Press the Measure button to enter
[MEAS DISPLAY] page, and then
press the LIST SET function button
on the right side of the LCD to enter
the [LIST SET] page.
2. Use arrow keys to move cursor and
select LEVEL item on the [LIST SET]
page.
3. Use the numeric keypad to enter the test
voltage/current.
To Next Page
Loading...
