OPERATION
149
Start
03/02/09
10 : 30
ConfigureExitDetail
When the program has finished, the physical channels
that have run will be displayed, a PASS or FAIL will be
displayed if Go/NoGo testing has been set.
16. When the program has finished,
press F1 to see any result details.
Start
03/02/09
10 : 30
ConfigureExit
The Program (P) and Sequence (S) numbers for the
Program are displayed on the left hand side and the
Go/NoGo (G/N) results are displayed on the right
hand side for each channel in the program.
To Next Page
Loading...