PEL-2000 Series User Manual
176
2. Use the Selector knob to scroll
down to highlight CCH Step.
Note: CCH Step is off-screen when
entering Other menu.
3. Press the Selector knob to edit
the selected setting, turn to
change the setting.
OR
Use the number pad to enter a
number.
4. Press the Selector knob or Enter
to confirm selection.
5. Repeat steps 2-4 to edit the step
resolution of:
CCL Step
CRH Step
CRL Step
CV Step
Note
The Step resolution settings only apply to the active
channel, other channels will not be affected.
All manuals and user guides at all-guides.com
all-guides.com
To Next Page
Loading...