GW Instek PEL-3000 Series - FIRST TIME USE INSTRUCTIONS; Rack Mount Kits

PEL-3000(H) User Manual
24
The variable resistors are used to adjust the full
scale and offset setting for the input value of the
external control sources such as voltage or
resistance.
Exhaust fan
The exhaust fan is used to expel the heat from the
unit. Please ensure there is at least 20cm distance
between any object and the fan.
Rear Panel Input
terminals
Rear Panel Input Terminals. Electrically connected
to the front panel input terminals. Accepts M8
bolts or M4/M3 sized screws. See page 35 for
connection details.
Remote Sensing
Terminals
Sensing terminals for remote sense. See page 36.
Accepts M3 sized screws.
Power Socket
Power Socket:
100-120V, 200-240V
47-63Hz.
Power Switch
Turns the unit on/off.
USB A
USB A Slave port. USB 1.1/2.0