GW Instek PEL-3111 - Display Overview; Measurement Area; First Time Use Instructions

Display Overview
1 2
3
4
5
6
Mode
CV
I Range
H 35A
V Range
L 15V
Function
Static
Configure
0.000
V
0.000
A
0.00
w
SlewRate 2500.00
CC B Value 0.000
CC A Value 0.000
LOADRS232
A Value
Fine
03/Sep/2012
mA/us
A
A
Description
1. Date and time
2. Main frame status panel
3. Operation status panel
4. Soft keys
5. Setting area
6. Measurement area
First Time Use Instructions
Use the following procedures when first using the
PEL-3000(H) to power up the instrument, set the
internal clock, restore the factory default settings and
check the firmware version. Lastly, the Conventions
section will introduce you to the basic operating
conventions used throughout the user manual.
Power Up
1. Insert the AC power cord into the power socket.
2. Turn the power switch on
from the rear panel.
(O → —)