GW Instek PEL-3111 - Page 46

PEL-3000(H) User Manual
44
Update Firmware
1. Insert a USB drive into the USB port. Ensure
the USB drive has the firmware file located in
the root directory.
2. Press
Shift
+
File
FUNC
.
3. Select USB with the Media[F1] soft-key.
4. Press the File Utility[F5] soft-key.
5. Select the *.UPG upgrade file and press
Select[F1] twice. Once to select the file and
once to confirm.
6. Wait for the update to complete and reset the
power when prompted.
Note
Do not turn the load generator off or remove the USB
memory when the firmware is being read or
upgraded.