GW Instek PSW 30-108 - Page 115

CONFIGURATION
115
Setting Normal Function Settings
The normal function settings (F-01~F-61, F-
88~F-89) can be easily configured with the
Function key.
 Ensure the load is not connected.
 Ensure the output is off.
Note
Function setting F-89 (Show Version) can only be
viewed, not edited.
Configuration settings F-90~F-95 cannot be edited
in the Normal Function Settings. Use the Power
On Configuration Settings. See page 117 for
details.
Steps
1. Press the Function key. The
function key will light up.
Function
2. The display will show F-01
on the top and the
configuration setting for
F-01 on the bottom.
3. Rotate the Voltage knob to change
the F setting.
Voltage
Range
F-00~ F-61, F-88~F-89
4. Use the Current knob to set the
parameter for the chosen F setting.
Current
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com