GW Instek PSW 30-72 - Calibration

PSW Series User Manual
114
Master/Slave
Sets the power supply as master or slave. See
the parallel/series operation for details, page
72.
F-93
0 = Master/Local
1 = Master/Parallel1
2 = Master/Parallel2
3 = Slave/Parallel
4 = Slave/Series (Only for 30V, 80V,
160V models)
External Out
Logic
Sets the external logic as active high or low.
F-94
0= High ON, 1 = Low ON
Power Switch Trip
Turns the power off if enabled when the
protection settings are tripped.
F-95
1 = Disable, 0 = Enable
Calibration
Programmable
Calibration
The calibration password is used to access the
local mode calibration or other special
functions. The password used determines
which function is accessed. Please see your
distributor for details.
F-00
0000 ~ 9999
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com