GW Instek PSW 30-72 - Using the Output Terminal Cover PSW-30;80;160

PSW Series User Manual
44
Using the Output Terminal Cover PSW-30/80/160
Steps
1. Remove the screw holding the top cover to the
bottom cover.
2. Line-up the bottom cover with the notches in
the output terminals.
3. Place the top terminal cover over the bottom
cover.
Details
2
3
1
4. Use your thumb to slide the terminal covers
shut, as shown in the diagram below.
5. When the top and bottom covers are flush, re-
insert the screw that was removed in step 1.
4
5
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com