GW Instek PSW 30-72 - Using the Output Terminal Cover PSW-250;800

PSW Series User Manual
50
Using the Output Terminal Cover PSW-250/800
Steps
1. Screw the bottom
cover onto the rear
panel using the two
M4 screws.
1
2. Slide the top cover
over the bottom
cover.
2
3. Finally, secure the
top cover with the
screw in the center of
the top cover.
3
Removal
Reverse the procedure to remove the terminal
covers.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com