gwm ORA 03 - Page 7

7
PRE ROAD INSPECTION
· Lubricate and check operation of bonnet
release mechanism.
· Check alignment of bonnet.
· Lubricate and check operation of door
hinges and lock mechanisms.
· Check operation of windows manual/power.
· Check central locking switches and
mechanism for correct function.
· Lubricate and check operation of
boot/tailgate hinges and lock mechanisms.
· Inspect EV charging point cap for ease of
operation and lubricate accordingly.
· Check/top up brake uid reservoir.
· Check batterys charge and top up electrolyte
level (Excluding high voltage battery).
· Ensure battery cables are secure and coated
with petroleum jelly.
· Check/top up coolant level.
· Check security of all hoses.
· Check for coolant loss and rectify accordingly.
· Check cooling fan and electrical connections
for security.
· Check/top up front transaxle oil.
· Check/top up rear transaxle oil.
· Check/lubricate jack and ensure jack and
tool are correctly located.
· Check/top up washer uid reservoirs.
· Check wipers for quiet and effective
operation.
· Check/adjust aim of washer jets.
· Inspect road wheels for damage.
· Check/adjust wheel nut torque.
· Check/adjust tyre pressures.
· Check seats for adjustability.
· Check operation of folding rear seat.
· Check seat belt function.
· Install fuses and initialise systems etc.
· Activate anti-theft systems.
· Inspect fusible links for security.
· Examine light lenses for dust/water ingress.
· Check operation of all lights.
· Check operation of horn.
· Inspect steering column U/J’s for serviceability.
· Inspect track-rod ends for security and installation.
· Inspect rack boots for damage and oil seepage.
· Check security of steering rack mounting.
· Remove and discard plastic covers (if tted)
from brake discs.
· Connect GWM diagnostic tool and check
all systems are functioning correctly and clear
memory.
· Check/perform any recall campaign work
or software updates.
· Check eCall activation.
Pre-Delivery Inspection and Adjustment Service Checklist