safety.
〉
The function cannot be used when
the vehicle runs on slippery roads.
Otherwise, the vehicle will get out of
control and cause an accident.
CAUTION
If the vehicle remains braking in 3 s af-
ter activating the launch control func-
tion, the vehicle will exit launch control
function and enable the time-out pro-
tection to protect the motor system.
When the vehicle is in time-out state, it
is necessary to release accelerator ped-
al before disabling the time-out state
for the next launch control.
NOTICE
The launch control function may not be
normally activated because of the tem-
perature of the power battery.
Stop the vehicle
1. After releasing the accelerator pedal,
depress the brake pedal.
2. After the vehicle is parked steadily,
switch to N gear.
3. Applying parking brake
NOTICE
When you unfasten the seatbelt at
driver’s side and open the door at driv-
er’s side, the vehicle can applying park-
ing brake automatically.
4. Release the brake pedal.
CAUTION
〉
When a temporary stop is required
on a slope, the brake pedal must be
stepped on or the parking brake
must be applied, and the accelerator
pedal or the crawling function must
not be used to prevent the vehicle
from rolling.
〉
When stopping the vehicle on a
slope, block the wheels with some-
thing if necessary to prevent rolling.
104
2
Driving
To Next Page
Loading...