How to use
F1B663CD96E7
〉
When the ignition switch is in ON
mode, the anti-collision radar can be
opened or closed manually by press-
ing the button.
〉
Switch to the gear R and the anti-colli-
sion radar will automatically turn on.
〉
If the moving speed exceeds 15 km/h,
the anti-collision radar will be auto-
matically stopped.
Detection scope and alarm mode
Radar sensor posi-
tion
Detection scope
[m]
Front on both
sides
0.6
Front center 1.0
Rear on both sides 0.6
Rear center 1.5
After the anti-collision radar is started, if
the sensor identies obstacles within the
detection range, it will start to give an
alarm.
When the distance between the vehicle
and the obstacle reduces, the frequency
of alarm sounds will gradually increase.
When the distance between the obstacle
and the vehicle is within about 0.3 m,
the alarm sound will be heard for a long
time, and the vehicle shall not be re-
versed to avoid collision.
Reverse camera
About the system
The reverse camera captures images
from behind the vehicle using the rear
view camera and transmits the image
signal to the screen for display, thereby
assisting the driver to safely and easily
park the vehicle.
How to use
〉
Switch to gear R and reverse camera
will automatically turn on.
After the reverse camera system is
turned on, you can select various view
modes according to personal habits.
〉
Exit gear R and the reverse camera will
automatically turn o.
Dynamic guide line
The dynamic guide line can display the
width of the vehicle body and calculate
the movement track of the vehicle ac-
cording to the turn angle of the steering
wheel as well as assist the driver in park-
ing the vehicle.
114
2
Driving
To Next Page
Loading...