gwm ORA GOODCAT 2022 - Page 117

Vehicle equipped with fully automatic integrated parking system
873C039AB3ED
Ⓐ Function setting area
Ⓑ Top view area
Ⓒ Image area
Ⓓ View identication
In 2D view mode, it indicates the orientation of the current view
Function setting
: Back button
Tap the back button to return to the previous interface. Tap the back button on the
main interface to exit the image interface.
: Switch-driving-mode button
Tap the button to switch the view mode between 2D and 3D.
: View switch button
Tap the button to switch the view mode between normal mode, wide view mode and
wheel mode.
: Lane auxiliary line setting button
You can switch the display mode of the assist line by repeatedly touching the assist
line setting button. When set to display mode, the guidance line displays the body
width, which can assist the driver in parking.
NOTICE
Considering dierent vehicle model congurations, this button is located under the
system setting menu for certain models.
116
2
Driving