EasyManua.ls Logo

gwm ORA GOODCAT 2022 - Page 125

Default Icon
277 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
conditions.
Under complex road conditions (such
as o-road conditions or narrow pas-
sages), please turn o the low-speed
emergency braking function. Other-
wise, the system may apply unneces-
sary braking.
Please turn o the low-speed emer-
gency braking function after the vehi-
cle is equipped with traction devices
or when the vehicle is towing other
vehicles. Otherwise, the system may
apply unnecessary braking.
Flank protection SDW
You can turn on or turn o the ank
protection function.
After the function is enabled and when
the sensors on the left and right sides
of the vehicle body identify obstacles,
the system prompts the driver to park
carefully through pictures and sound
alarms.
Steering signal on intelligently
You can turn on or turn o automatic
turning function.
After the function is activated, set to D
gear and turn on the turn signal lamp
or turn the steering wheel to a certain
angle, then the AVM will be automati-
cally turned on. After the steering
wheel is restored, the AVM will be au-
tomatically turned o when the turn
signal lamp is o or the vehicle speed
exceeds a certain value.
Look around and exit speed set-
ting
The speed for exiting AVM mode can
be set.
The AVM will be turned o automati-
cally when the vehicle speed exceeds a
certain value.
Road calibration
During the using of vehicle, when the
camera position changes due to
bumping of vehicles or aging of parts ,
the image mosaic may be misplaced,
blurred and distorted. At this time, the
image mosaic eect can be optimized
through the lane calibration setting.
Please refer to the prompt information
on the multimedia display screen for
the specic calibration methods and
requirements.
Restore factory calibration
After re-calibrating the road, you can
restore the factory calibration by
pressing the “restore factory setting”.
Worry-free car use
Intelligent pre-cooling
You can activate or deactivate the intelli-
gent view switch function. After the func-
tion is activated, the pre-cooling can be
set through applications in mobile
phone so that the vehicle can get proper
temperature before using and improve
user experience.
124
2
Driving

Table of Contents