gwm ORA GOODCAT 2022 - Steering Wheel Button; Driving Data Interface

Steering wheel button
98099E27F1D6
Ⓐ Menu/ back button
Ⓑ OK button
Ⓒ Page-turn button
Menu/ back button
Press the button to return to the previ-
ous menu.
Press this button can circularly switch
the functions of the multi-function tab
bar if there is no previous menu.
OK button
Press this button to enter the next
menu, conrm the current settings or
shield the primary alarm messages cur-
rently shown.
Press and hold this button to temporari-
ly shield all alarm messages currently
shown or reset certain driving data in-
terfaces.
Page-turn button
If multiple pages or options are dis-
played on the multi-information display,
press this button to turn pages to view
or switch options.
Driving data interface
Press the menu / back button on the
steering wheel until the driving data tab
is selected. At this time, the driving
data interface will be showed in the in-
formation center.
Press the up button
on or down but-
ton
on the steering wheel to switch
the driving data shown on the informa-
tion center.
NOTICE
The tripmeter, driving time, average
speed will be displayed on data inter-
face A and B.
〉
The data interface A shows the driv-
ing data within the current power-on
cycle. After the vehicle power supply
is turned to the LOCK position for 4
hours, the data will be automatically
reset.
〉
On the data interface B, the driving
data from the last manual reset until
the current time is displayed.
〉
Press the OK button on the steering
wheel when the tripmeter, driving
time or average vehicle speed is
shown on the information center to
switch between the data interface A
and the data interface B.
〉
Press the OK button on the steering
wheel when the tripmeter, driving
time or average vehicle speed is
shown on the information center to
manually reset the corresponding
156
2
Driving