checked on the alarm mes-
sage interface of the instru-
ment.
Turn signal indicator
When the left turn signal
lamp is on, the left turn sig-
nal indicator will ash.
When the right turn signal
lamp is on, the right turn sig-
nal indicator will ash.
When the emergency ash-
ers are on, the turn signal in-
dicator and all external turn
signal lamps will ash in uni-
son.
CAUTION
When the turn signal indica-
tor ashes quickly, it usually
means that the turn signal
lamp has been damaged. Re-
place it as soon as possible.
Otherwise, other drivers on
the road will not be able to
see your turn signals.
Light on indicator
It illuminates to indicate that
the main lighting switch is
ON.
Position indicator
It illuminates to indicate that
the position lamp and the li-
cense-plate lamp are ON.
High beam lamp indicator
It illuminates to indicate that
the high beam headlamps
are turned on.
Indicator for automatic switch-
ing of high and low beams
This indicator illuminates in
green to indicate that the au-
tomatic switching function
of high and low beams is en-
abled.
This indicator illuminates in
yellow to indicate that the
automatic switching func-
tion of high and low beams
failed. In this case, please
manually turn on the high
beam headlamp or low beam
headlamp as needed, and
drive the vehicle to service
provider for inspection and
repair as soon as possible.
Rear fog lamp indicator
It illuminates to indicate rear
fog lamps are turned on.
Seat belt unfastened warning
lamp
It illuminates to indicate that
the driver, the front passen-
ger or the rear passenger
hasn't fastened the seat belt.
Vehicle door not closed warn-
ing lamp
It illuminates to indicate that
161
2
Driving
To Next Page
Loading...