2. Press one end of the charging port
cover to pop open the charging port
cover slightly.
A4850A167008
3. Take out the charging cable and in-
sert the plug into the socket.
WARNING
〉
A circuit breaker must be installed on
the power supply side, and you must
use a socket that matches the charg-
ing cable supplied with the vehicle.
〉
For the charging circuit, avoid an ex-
cess of line connectors and adapters,
and avoid using too long cables. Pre-
vent the abnormal heating and elec-
tric leakage from causing re or elec-
tric shock.
4. Remove the dust cap of the ordinary
charging port and the protection cov-
er on the head of the charging gun,
and insert the charging gun into the
ordinary charging port.
BE6A4C377FEC
After connecting, the charging gun
will be automatically locked. At this
time, the connection indicator on the
control box and the charging indica-
tor on the instrument will be illumi-
nated.
CAUTION
Do not force the charger plug and
charging port to connect if one or both
have a foreign object inside. Please
contact the service provider immedi-
ately. Forcing them to connect will
damage the charger and vehicle.
Use a blow dryer to defrost a frozen
charging port. Using force to insert the
charger plug when the port is frozen
will cause a failure.
NOTICE
〉
If the charging mode is set to charg-
ing now, the vehicle can charge after
42
1
Operation
To Next Page
Loading...