Ⓐ Front wiper mist operation (MIST)
Pull up the wiper control combina-
tion switch to the MIST position. After
releasing, it will automatically return
to its position, and the front wipers
will wipe once.
Ⓑ Front wiper o (OFF)
Ⓒ Automatic brush (AUTO)
Ⓓ
Low speed wipe (LO)
Ⓔ High speed wipe (HI)
CAUTION
〉
If the windscreen is dirty or has any
foreign object stuck to it (such as
snow or tree sap and so on), please
clean o and remove the foreign ob-
ject before use to avoid damaging
the blade and the internal structure
of the wiper.
〉
Before using the wipers in the cold
season, you shall check whether the
wiper blade is frozen to the wind-
screen. If the wiper blades are frozen
to the windscreen, make sure to de-
frost them before use to avoid dam-
aging the blade and wiper motor.
〉
If the wiper get stuck for any rea-
sons, such as snow, please turn o
the wiper and park the vehicle at a
safe location as soon as possible.
Then remove anything that is pre-
venting the wipers from wiping so
that the wiper can work normally.
〉
Please do not operate the front wip-
er when the engine hood is opened.
Otherwise, the wiper or the engine
hood may be damaged.
〉
Do not use the product which can
produce cladding on the windscreen
(for example, the screenwash con-
tains plated crystal or coating lm,
glass coating and so on); do not use
the windscreen washer containing
waxiness; do not wash the vehicle us-
ing wax water. Otherwise, the wiper
may bounce and make abnormal
sounds when wiping.
〉
The blade cannot get contact with
oily cleaning agent. They may react
chemically which cause the blade de-
formed.
Adjustment of auto wiping fre-
quency
20A90096558F
Turn the rotation adjustment knob to
change the sensitivity settings for the
rainfall and light sensor in order to ad-
just the wiping frequency of the front
wiper at the auto wiping position.
63
1
Operation
To Next Page
Loading...