Vehicle equipment
Please note that this manual contains all
the standard equipment, country-specif-
ic equipment and special equipment for
this model series. Thus, some equip-
ment or features described in this man-
ual may not be installed onto your vehi-
cle or are only available in some mar-
kets. For further conguration informa-
tion, please refer to relevant sales infor-
mation or consult with your distributor
selling the vehicle to you.
How to use
The mobile wireless charging function
can be enabled or disabled through the
【Vehicle Settings】→【In-Car】→
【Wireless Charger】 interface on multi-
media display screen.
After enabling the wireless charging
function of mobile phone, make sure
that the doors are closed, turn the pow-
er supply of the vehicle to ON position
or start the vehicle. Then the mobile
phone placed in the charging area can
be charged.
B94046B3063B
NOTICE
In order to achieve a better charging
eect, it is necessary to ensure that the
charging coil of the mobile phone is
facing downwards.
NOTICE
〉
This function is not applicable to all
mobile phones, but only to mobile
phones that have passed the "Qi" of-
ficial standard certication and can
be normally placed in the charging
area.
〉
Only one mobile phone can be charg-
ed at a time.
〉
On bumpy roads, intermittent stop-
ping and resuming of wireless charg-
ing may occur. If the mobile phone
deviates from the charging area and
stops charging, it is necessary to
move the mobile phone back to the
charging area.
〉
It is normal that wireless charging de-
vices and mobile phones will get hot
during charging.
When the temperature is too high,
the system will stop charging, and
will continue charging after the tem-
perature drops.
〉
If the phone breaks down, it may also
cause failure to charge. Other mobile
phones that meet the requirements
can be used for wireless charging de-
tection to conrm whether the mo-
bile phone is faulty.
Mobile wireless charging
73
1
Operation
To Next Page
Loading...