03 Guide for initial operation
07 08
1. Choose flat ground to place the
WalkingPad. It is forbidden to
place it on thick and soft cushion.
Please note: Don't connect the
power before the WalkingPad
is fully unfolded.
4. Connect the power cord and
press the button to switch on.
2. Unfold the walkingpad slowly and
press it down to completely flat.
3. Check and adjust the walking belt
to make sure it's centered.
5. Search ''Walkingpad" App from
Apple Store or Google Play and
complete installation.
6. Open the App, follow the prompts
to set up the device.
10. If the belt deviates from the orbit
in use, please adjust properly.
SEE: 06 Maintenance and
service.
8. Complete Novice Guide to
unlock all Functions ( maximum
speed 6 km/hr ). Otherwise the
speed limit remains at 3 km/hr.
7. Enter novice guide. 9. Start to use the WalkingPad.
11. Short press: return to the previous mode.
Long press: switch to Standby mode.
Mode Switch
To Next Page
Loading...