Need help?Do you have a question about the GYS TIG 200 AC/DC HF FV and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Input Current | 32 A |
| Welding Current Range (TIG) | 5 - 200 A |
| Welding Current Range (MMA) | 10 - 160 A |
| Protection Class | IP23 |
| Insulation Class | H |
| HF Start | Yes |
| AC Frequency | 20 - 200 Hz |
| Post Gas | 0 - 10 s |
| Cooling System | Air cooled |
| Control | Digital |
| Efficiency | 85% |
| Power Factor | 0.7 |
| Welding Processes | TIG, MMA |
| Input Voltage | 230 V |
| Duty Cycle | 200 A at 60% |
| Type | TIG/MMA Welding Inverter |
Read and understand safety recommendations before using the unit.
Details personal protective equipment and precautions for welding safety.
Hazards of fumes/gas, fire/explosion prevention, and electrical safety.
Safe handling, transport, and storage of gas cylinders.
Requirements for electrical connection and precautions against electric shock.
Step-by-step guide to connecting and selecting remote control or pedal.
Duty cycle specifications and essential safety measures for welding operations.
Specific safety precautions for hazardous environments and positions.
Table of common symptoms, causes, and remedies for operational issues.
To Next Page