2-21
Operation Command Description
Enter system view
system-view
—
Enter cluster view
cluster
—
Add the MAC address of a
specified device to the
cluster blacklist
black-list add-mac
mac-address
Optional
By default, the cluster
blacklist is empty.
Delete the specified MAC
address from the cluster
blacklist
black-list delete-mac
mac-address
Optional
Delete a device from the
cluster add this device to
the cluster blacklist
delete-member
member-id
[ to-black-list ]
Optional
Displays the information
about the devices in the
cluster blacklist
display cluster
black-list
Optional
This command can be
executed in any view.
2.3 Displaying and Maintaining Cluster Configuration
Operation Command Description
Display all NDP configuration and
running information (including the
interval to send NDP packets, the
holdtime, and all neighbors
discovered)
display ndp
Display NDP configuration and
running information on specified
ports (including the neighbors
discovered by NDP on the ports)
display ndp interface
port-list
Display global NTDP information
display ntdp
Display device information
collected by NTDP
display ntdp device-list
[ verbose ]
Display status and statistics
information about the cluster
display cluster
Display information about the
candidate devices of the cluster
display cluster
candidates
[ mac-address H-H-H |
verbose ]
Display information about the
member devices of the cluster
display cluster members
[ member-number |
verbose ]
You can execute
the display
command in any
view.
To Next Page
Loading...
Need help?
General