H3C S5130S-EI series - Page 19

1-14
Item S5130S-28ST-PWR-EI S5130S-52ST-PWR-EI
• Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
Maximum PoE power
per port
30 W
Total PoE power 370 W
Minimum power
consumption
20 W 32 W
Maximum power
consumption
(including PoE power
consumption)
450 W 470 W
Chassis leakage
current compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC
60950-1/GB4943.1
Melting current of
power supply fuse
2 A/250 V
Cooling system
Using fixed fan trays to draw ambient air in from the chassis left side and exhaust
heated air from the chassis right side.
Operating
temperature
–5°C to +45°C (23°F to 113°F)
Operating humidity 5% to 95%, noncondensing
Fire resistance
compliance
UL 62368-1/EN 62368-1/IEC 62368-1/UL 60950-1/EN 60950-1/IEC
60950-1/GB4943.1
Table1-10 Technical specifications for PoE switch models (2)
Item
S5130S-28P-P
WR-EI
S5130S-52P-
PWR-EI
S5130S-28P-
HPWR-EI
S5130S-28P-
HPWR-EI-AC
S5130S-52P-
PWR-EI-AC
Dimensions
(H × W × D)
43.6 × 440 × 260
mm (1.72 ×
17.32 ×10.24 in)
43.6 × 440 ×
400 mm (1.72 ×
17.32 × 15.75
in)
43.6 × 440 ×
260 mm (1.72 ×
17.32 × 10.24
in)
43.6 × 440 × 260
mm (1.72 ×
17.32 × 10.24 in)
43.6 × 440 ×
400 mm (1.72
× 17.32 ×
15.75 in)
Weight ≤ 4 kg (8.82 lb) ≤ 6 kg (13.23 lb)
≤ 4.5 kg (9.92
lb)
≤ 4.5 kg (9.92 lb)
≤ 6 kg (13.23
lb)
Console port 1 × serial console port
10/100/1000
BASE-T
autosensing
Ethernet
port
24 48
28 (The four
highest-numbe
red
10/100/1000B
ASE-T
autosensing
Ethernet ports
each form
combo
interfaces with
its
corresponding
SFP port.)
28 (The four
highest-number
ed
10/100/1000BA
SE-T
autosensing
Ethernet ports
each form a
combo interface
with its
corresponding
SFP port.)
48
SFP port 4 4
4 (Each and its
corresponding
10/100/1000B
ASE-T
autosensing
4 (Each and its
corresponding
10/100/1000BA
SE-T
autosensing
4