H3C S5500-EI Series - Page 17

Quick Start
H3C S5500-EI Series Ethernet Switches
Chapter 1 Product Overview
1-6
LED Mark Status Description
POST
failed
The power
LED
flashes
red
The LED flashes
the POST test ID
of the failed test.
Softwa
re
loading
The power
LED
flashes
green.
A bar rotates
clockwise around
the LED.
Fan
failure
The power
LED is
solid red.
The LED displays
F.
Over-t
emper
ature
alarm
The power
LED is
solid red.
The LED displays
t.
Cluster
state
The power
LED is
solid
green.
For a command
switch, the LED
displays C.
For a member
switch, the LED
displays S.
For a candidate
switch, the LED
displays c.
The LED displays
1 if there is only
one unit.