27
Fault/UID LED status Present/Active LED status Description
Steady blue
Steady green/Flashing green
(4.0 Hz)
The drive is operating correctly and is
selected by the RAID controller.
Off Flashing green (4.0 Hz)
The drive is performing a RAID migration or
rebuilding, or the system is reading or
writing data to the drive.
Off Steady green
The drive is present but no data is being
read or written to the drive.
Off Off The drive is not securely installed.
Table 13 NVMe drive LED description
Fault/UID LED status Present/Active LED status Description
Flashing amber (0.5 Hz) Off
The managed hot removal process is
completed. You can remove the drive
safely.
Flashing amber (4.0 Hz) Off The drive is in hot insertion process.
Steady amber
Steady green/Flashing green
(4.0 Hz)
The drive is faulty. Replace the drive
immediately.
Steady blue
Steady green/Flashing green
(4.0 Hz)
The drive is operating correctly and selected
by the RAID controller.
Off Flashing green (4.0 Hz)
The drive is performing a RAID migration or
rebuilding, or the system is reading or
writing data to the drive.
Off Steady green
The drive is present but no data is being
read or written to the drive.
Off Off The drive is not securely installed.
Drive configurations and numbering
Unless otherwise specified, the term "standard" in tables Table 14, Table 16, Table 18, and Table 19
refers to a standard storage controller with 8 internal SAS ports, the RAID-LSI-9361-8i(1G)-A1-X for
example.
8SFF server
Table 14 presents the drive configurations available for the 8SFF server and their compatible types
of storage controllers and NVMe SSD expander modules.
These drive configurations use different drive cage bays and drive numbering schemes, as shown
in Table 15.
To Next Page
Loading...
