H3C UniServer R4900 G3 Series - Page 7

5
Figure 3 8SFF front panel
(1) VGA connector (optional) (2) USB 2.0 connector (optional)
(3) Drive cage bay 1 for 8SFF NVMe SSDs, optical drives, or SATA M.2 SSDs (optional)
(4) Drive cage bay 2 for 8SFF SAS/SATA drives or 8SFF NVMe SSDs
(5) Drive cage bay 3 for 8SFF SAS/SATA drives or 8SFF NVMe SSDs (optional)
(6) Diagnostic panel or serial label pull tab module (optional) (7) USB 3.0 connector
Figure 4 25SFF front panel
(1) VGA connector (optional) (2) USB 2.0 connector (optional)
(3) Diagnostic panel or serial label pull tab module (optional) (4) USB 3.0 connector
(5) 25SFF drives (optional)
Figure 5 8LFF front panel
(1) VGA connector (optional) (2) USB 2.0 connector (optional)
(3) Diagnostic panel (optional) (4) USB 3.0 connector
(5) 8LFF SAS/SATA drives