EasyManua.ls Logo

H3C UniServer R4900 G3 Series - 1200 W Platinum Power Supply; Expander Modules

H3C UniServer R4900 G3 Series
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
70
Item Specifications
Hot swappable Yes
Cold backup Yes
1200 W Platinum power supply
Item Specifications
Model PSR1200-12A
Rated input voltage range
100 VAC to 127 VAC @ 50/60 Hz (1000 W)
200 VAC to 240 VAC @ 50/60 Hz (1200 W)
192 VDC to 288 VDC (240 HVDC power source) (1200 W)
Maximum rated input current
12.0 A @ 100 VAC to 240 VAC
6.0 A @ 240 VDC
Maximum rated output power 1200 W
Efficiency at 50 % load 94%, 80 Plus Platinum level
Temperature requirements
Operating temperature: 0°C to 50°C (32°F to 122°F)
Storage temperature: –40°C to +70°C (–40°F to +158°F)
Operating humidity 5% to 90%
Maximum altitude 5000 m (16404.20 ft)
Redundancy 1+1 redundancy
Hot swappable Yes
Cold backup Yes
Expander modules
Model Specifications
ODD-Cage-R4900
Common expander module for optical drive expansion or M.2 SATA SSD
expansion on the 8SFF server
DSD-EX Dual SD card extended module (supports RAID 1)
RS-M2-2U
M.2 transfer module (used to expand the server with two front SATA M.2
SSDs)
RC-M2-C M.2 transfer module (used for expansion of two rear SATA M.2 SSDs)
HDD-Cage-2SFF-R4900 Rear 2SFF SAS/SATA drive cage module
HDD-Cage-4SFF-R4900 Rear 4SFF SAS/SATA drive cage module
HDD-Cage-2LFF-R4900 Rear 2LFF SAS/SATA drive cage module
HDD-Cage-4LFF-R4900 Rear 4LFF SAS/SATA drive cage module
HDDCage-4SFF-4UniBay
Rear 4SFF UniBay drive cage module (supports SAS/SATA drives and
NVMe drives)
HDD-Cage-8SFF-2U-NVMe-3 Front 8SFF NVMe drive cage module for drive cage bay 3

Table of Contents

Related product manuals