H3C UniServer R4900 G3 Series - 8 SFF Server with a 16 SFF;24 SFF Drive Configuration

83
8SFF server with a 16SFF/24SFF drive configuration
Use Table 25 to determine the maximum operating temperature of the 8SFF server with a
16SFF/24SFF drive configuration. A maximum server operating temperature applies if the server
contains any options in its matching hardware option list.
If a single fan fails, the maximum server operating temperature drops by 5°C (41°F) and cannot
exceed 35°C (95°F).
NOTE:
All maximum server operating temperature values are provided on the basis that the fans are
installed as needed and operating correctly. For more information about fan configurations, see the
guidelines in "Installing fans."
Table 25 Temperature requirements for the 8SFF server with a 16SFF/24SFF drive
configuration
Maximum server operating
temperature
Hardware options
20°C (68°F)
GPU-P100, GPU-V100-32G, or GPU-V100 in a 24SFF NVMe drive
configuration that uses NVMe drives with a 3.2TB capacity (or larger).
22°C (71.6°F)
Any of the following GPU modules in a 16SFF or 24SFF drive
configuration that uses 165W (or higher) processors and NVMe drives
with a 3.2TB capacity (or larger):
• GPU-K80-1.
• GPU-M60-1-X.
• GPU-P40-X.
25°C (77°F)
• GPU module GPU-P100, GPU-V100-32G, or GPU-V100 in any of
the following drive configurations:
{ 16SFF (8SFF SAS/SATA+8SFF NVMe, or 16SFF NVMe) with
NVMe drives that have a 3.2TB capacity (or larger).
{ 24SFF NVMe, without NVMe drives that have a 3.2TB capacity
(or larger).
• Any of the following GPU modules in a 16SFF or 24SFF drive
configuration that uses NVMe drives with a 3.2TB capacity (or
larger):
{ GPU-K80-1.
{ GPU-M60-1-X.
{ GPU-P40-X.
27°C (80.6°F)
Any of the following GPU modules used with 165W (or higher)
processors (without NVMe drives that have a 3.2TB capacity or larger):
• GPU-K80-1.
• GPU-M60-1-X.
• GPU-P40-X.
30°C (86°F)
• GPU modules:
{ GPU-K80-1.
{ GPU-M60-1-X.
{ GPU-P40-X.
• GPU module GPU-P4-X, GPU-M4-1, GPU-T4, or GPU-MLU100-D3
in a 16SFF or 24SFF drive configuration that uses NVMe drives with
a 3.2TB capacity (or larger).
• GPU module GPU-M10-X in a 24SFF drive configuration that uses
NVMe drives with a 3.2TB capacity (or larger).
• GPU module GPU-P100, GPU-V100-32G, GPU-V100 used with