HABCO® TECHNICAL DOCUMENT - C096832 • 10126169
© HABCO Manufacturing Inc. “HABCO®, Cassette®, Cold Space Merchandiser®” are registered trademarks of HABCO Manufacturing Inc. Domestic and International Patents. Page 7
-
-
FIG. G3
FIG. G4
FIG. G5
NOTICE: RISK OF APPLIANCE DAMAGE! AFTER ACCESSING REFRIGERATION
OR ANY OTHER MECHANICALLY FASTENED AREAS OF THE APPLIANCE, RE-
FASTEN SECURELY.
WARNING: RISK OF DEATH, FIRE, EXPLOSION, ELECTRICAL SHOCK AND/OR
OTHER PERSONAL INJURY!
DO NOT ACCESS MECHANICALLY FASTENED AREAS WITHOUT PERMIS-
SION OF OWNER AND READING AND UNDERSTANDING PRODUCT
MANUAL.
DISCONNECT POWER BEFORE ACCESSING MECHANICALLY FASTENED
AREAS.
WARNING: RISK OF PERSONAL INJURY! EMPLOY BEST HEALTH AND SAFE-
TY LIFTING PRACTICES WHEN REMOVING SHIPPING PLATFORM(S); LEVEL-
ING CABINET; REVERSING DOORS; AND MOVING APPLIANCE. IF IN DOUBT,
ASK FOR HELP.
NOTICE: HABCO® WARRANTS FACTORY DOOR REVERSAL ONLY. ANY IS-
SUES AND SUBSEQUENT SOLUTIONS ARISING FROM FIELD REVERSED
DOORS ARE THE RESPONSIBILITY OF THE CUSTOMER. DOOR ADJUST-
MENTS ARE NOT COVERED UNDER WARRANTY. INSPECT DOOR HARD-
WARE FOR WEAR WHEN REVERSING OR SERVICING.
Though door gasket magnet will hold door in place, ensure unfas-
FIG. H1
i
Tilt door sideways out of the upper cabinet mounted bracket notch
-
To Next Page
