Habitat RADI-2W-SS15-A

Need help?

Do you have a question about the Habitat RADI-2W-SS15-A and is the answer not in the manual?

Summary

Safety and Care Advice

General Safety Precautions

Important advice before assembly: check parts, keep area clear, use soft surface, avoid power tools.

General Care and Maintenance

Guidance on dusting, cleaning spills, periodic checks for loose screws, and waste disposal.

Maximum Weight Limit

Specifies the maximum load capacity for shelves within the wardrobe.

Assembly Instructions

Frame and Back Panel Assembly

Initial steps involve assembling the main frame and attaching back panels.

Shelf and Support Installation

Installing shelf supports and back support rails for stability.

Door Preparation and Attachment

Steps for preparing doors by attaching hinges and then mounting them to the wardrobe.

Fitting Wall Strap

Wall Mounting Warning

Strong recommendation to secure the tall wardrobe to the wall for safety.

Guide to Wall Mounting & Fixings

Wall Fixing Selection

Information on identifying wall types and selecting appropriate fixings.

Drilling and Installation Hints

Tips for drilling holes, inserting wall plugs, and ensuring secure fitting.

This document provides assembly instructions and important information for the Radius 2 Door Wardrobe.

Function Description:

The Radius 2 Door Wardrobe is a piece of furniture designed for storage, featuring two doors. It is intended for indoor use and requires assembly. The wardrobe includes adjustable shelves and a hanging rail, offering versatile storage options for clothing and other items. Due to its height, it is strongly recommended that the wardrobe be securely attached to a wall using the provided wall strap to prevent tipping.

Important Technical Specifications:

Model: RADI-2W-SS15-A
Dimensions:
- Width: 124cm
- Depth: 58cm
- Height: 200cm
Maximum Weight Limit for Shelves:
- Adjustable big shelf: 25kg
- Adjustable small shelf: 50kg (Note: The diagram shows a "Max. 50kg" label on a small shelf, while the "Max. 25kg" is on a larger shelf. This could be a typo in the diagram, as typically larger shelves might have higher limits or the same. For safety, adhere to the indicated limits.)
Components (Panels):
- Top (1)
- Bottom (1)
- Left side (1)
- Right side (1)
- Wall (1)
- Adjustable big shelf (1)
- Adjustable small shelf (4)
- Hanging rail (1)
- Hanging support rail (2)
- Side back panel (2)
- Back stick (1)
- Left door (1)
- Right door (1)
Fittings (Quantities for assembly):
- M8x65mm Metal bolts (A): 8
- Ø4x20mm Screws (F): 14
- Ø3.5x15mm Screws (L): 44
- Shelf supports (P): 20
- Ø7x50mm Screws (W): 8
- Wall strap fitting (R): 1
- M8mm Metal nuts (D): 8
- M8mm Moon nuts (G): 8
- Magnetic catches (M): 4
- Ø3.5x30mm Screws (Q): 8
- 4mm Allen key (X): 1
- Spanner (E): 1
- Ø8x30mm Wooden dowels (H): 16
- Magnetic catch plates (N): 4
- Hinges (V): 6
- Wedge (&): 1

Usage Features:

Assembly: The wardrobe requires assembly, which is made easier with two people. It should be assembled on a soft, level surface to prevent damage to the unit or floor. Hand screwdrivers are recommended over power drills/drivers for inserting screws to avoid damaging the unit.
Placement: The wardrobe should be assembled as close to its final position as possible. It should not be placed directly in front of radiators, fires, or any other heat source.
Stability: A wedge is supplied to help stabilize the wardrobe on uneven floors.
Wall Mounting: A wall strap fitting is provided for securing the wardrobe to the wall. This is a critical safety feature due to the furniture's height. Users must assess their wall type and provide appropriate wall fittings (screws/plugs) if the provided screw is not suitable. Professional help or advice from a local hardware store is recommended if unsure about wall fitting types. Always check for hidden pipes and cables before drilling into walls.
Storage: The wardrobe features adjustable shelves and a hanging rail, allowing for customizable internal organization.

Maintenance Features:

Cleaning: Dust regularly with a clean, dry cloth. Spills should be wiped up immediately with a damp cloth and then dried with a clean duster. Furniture polish or spray is not necessary or recommended.
Fastener Checks: Periodically check that all screws on the unit are tight and not loose.
Disposal: The product should not be discarded with household waste. It should be taken to a local authority waste disposal center.
General Care: Avoid standing on or putting excessive weight on the product, as this can cause damage. Keep children and animals away from the work area during assembly, as small parts could pose a choking hazard. Ensure sufficient space for laying out parts before starting assembly.

Important Safety Advice:

Always check all components and tools are present before starting.
Remove all fittings from plastic bags and separate them into groups.
Do not stand on or put weight on the product.
Assemble on a soft, level surface.
Do not use power drills/drivers for inserting screws.
Dispose of packaging carefully and responsibly.
Retain "Batch Code" labels found on indicated items.
For wall mounting, ensure screws and wall plugs are suitable for supporting the unit. Consult a qualified tradesperson if unsure.
When drilling into walls, always check for hidden wires or pipes.
Ensure the drill bit matches the wall plug and hole size.
Drill holes horizontally and do not force the drill.
Take extra care when drilling high walls, ceilings, and ceramic tiles.
Ensure wall plugs are inserted beyond the thickness of ceramic tiles to prevent splitting.
Ensure wall plugs are well fitted and tight in the drilled hole.
Regularly check the wall fitting to ensure wall plugs or screws do not become loose.