Need help?Do you have a question about the HACH LANGE sc200 and is the answer not in the manual?
Explains hazard classifications (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Describes safety symbols indicating manual reference, electrical shock risk, and ESD sensitivity.
Briefly describes the module's function and connection to the sc200 controller.
Informs about the availability of Modbus registers for network communication.
Provides instructions and warnings for connecting the conductivity sensor to the module.
Explains hazard classifications (DANGER, WARNING, CAUTION, NOTICE) and their meanings.
Describes safety symbols indicating manual reference, electrical shock risk, and ESD sensitivity.
Briefly describes the module's function and connection to the sc200 controller.
Informs about the availability of Modbus registers for network communication.
Provides instructions and warnings for connecting the conductivity sensor to the module.
General| Input Voltage | 100-240 VAC, 50/60 Hz |
|---|---|
| Communication | RS232, RS485, Ethernet |
| Operating Temperature | 0 to 50 °C |
| Enclosure | NEMA 4X (IP66) |
| Outputs | 4-20 mA |
| Measurement Parameters | pH, ORP, Conductivity, Dissolved Oxygen |
| Inputs | Analog, Digital |
To Next Page