Figure 2 Keypad description
1 Display 6 Diag: enter the DIAG/TEST MENU
2 Navigation keys RIGHT, LEFT: switch
measurement displays, select options, navigate
data entry fields
7 Cal: enter the CALIBRATE MENU
3 Navigation keys UP, DOWN: scroll menus, scroll
measurement channels, enter numbers and letters
8 Back: go back to the previous menu
4 Home: go to the main measurement screen 9 Menu: select options from the analyzer main menu
5 Enter: confirm and open sub-menus
Display description
Refer to Figure 3 for the measurement screen descriptions. Refer to Figure 4 for the system status
descriptions.
Figure 3 Measurement screen
1 Home (main measurement screen) 6 Relays (second icon shown if an additional relay
module is installed)
2 Measurement channel name 7 Chemical form of the measured parameter
3 Activity (shown during a measurement or calibration
process)
8 Measurement value
4 Reminder (for a maintenance task) 9 Parameter name and sample stream number
5 SD card (shown when a SD card is inserted) 10 Analyzer name
6 English
To Next Page
Loading...
