Page 22 Installation – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
WGM - 28 November 2007 - Edition 01
Figure 2-10 PAT700 power supply and I/O wiring terminals
Power supply wiring
WARNING
Potential property damage or electrical shock! Adhere to ground network
requirements for the facility.
WARNING
After power supply wiring has been installed, make sure the field wiring box cover is
in place and the screw is tightened with a screwdriver to ensure that the cover is
properly bonded to protective earth.
Table 2-6 lists specifications for the power supply.
4-20 mA output wiring
connector
Digital input wiring
connector
Serial communications
wiring connectors
(see page 25)
Power supply wiring
connectors
Digital output wiring
connectors
Table 2-6 Power supply specifications
Description Specification
Voltage input 100 to 230 VAC universal
Frequency 50 to 60 Hz
Power 65 W maximum, fused at 1.25 A
To Next Page
Loading...
