Page 47 Setup – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
WGM - 28 November 2007 - Edition 01
Chapter 5 Setup
5.1 Accessing the setup dialog box
1) At the home screen, touch the << icon to open the sliding toolbar.
2) Touch the setup icon.
5.2 Setup dialog box
The setup dialog box allows you to navigate and change analyzer settings. Accessing this
dialog box does not interrupt the current operation. See Figure 5-1.
Figure 5-1 Setup dialog box
5.3 TOC
The TOC icon allows you to modify the settings for the TOC operating mode. Any changes are
stored in the settings file and become the defaults.
To Next Page
Loading...
