Page 70 Setup – PAT700 Total Organic Carbon Analyzer
Operator Manual Anatel
WGM - 28 November 2007 - Edition 01
Current password allows you to type your current password. You may enter 5 to 15
alphanumeric or symbol characters.
New password allows you to type your new password. The new password may not be the
same as any of the passwords in the password history list.
Confirm password allows you to retype your new password. Passwords in the password and
confirm password boxes must match.
• You may enter 5 to 15 alphanumeric or symbol characters in each text box.
• All three text boxes are case sensitive.
• All default values are blank.
• When you enter a character, only the “*” symbol appears for each key touch.
OK icon returns you to the sign on dialog box and saves the changes. All changes are noted
in the audit trail. None of the passwords appears.
Cancel icon returns you to the sign on dialog box. All changes are discarded and no entries
are made in the audit trail.
5.11 Factory
The factory icon enables factory personnel to enter information that may not be changed by
other users. Information on the factory dialog boxes can be viewed by any user but can be
changed only by the administrator or a factory user.
Entry into the factory dialog box for the purpose of changing the settings requires entry of the
user ID and password. Touching the cancel icon enables read-only access to factory settings.
See Chapter 10.
General tab
Figure 5-25 Factory settings dialog box, general tab
Model number text box displays the PAT700 model number.
Serial number text box displays the PAT700 serial number.
Factory calibration date text box displays the date of the last factory calibration in ISO
“yyyy-mm-dd” format.
To Next Page
Loading...
