WGM - 28 November 2007 - Edition 01
PAT700 Total Organic Carbon Analyzer – Setup Page 73
Anatel Operator Manual
Warning text box (read-only) allows you to view the factory-set value for the UV Detect™
sensor output to be measured before a lamp is marginal.
Failure text box (read-only) allows you to read the factory-set value for the UV Detect sensor
output to be measured before a lamp has failed.
Return icon returns you to the setup dialog box.
Pump tab
Figure 5-30 Factory settings dialog box, pump tab
The pump tab shows the values used for calibrating the sample pump flow rate and grab
sample flush volume, excursion bottle fill time, and bottle back flush time. These are factory-
set values that are read-only.
Return icon returns you to the setup dialog box.
Algorithm tab
Figure 5-31 Factory settings dialog box, algorithm tab
To Next Page
Loading...
