Page 124
Alarms
7.4.4 Measurement alarms
A measurement alarm condition occurs any time the measured TOC exceeds the
user-defined limit or conductivity exceeds the USP-defined alarm limit. When an alarm
condition occurs, the corresponding data value turns red. If the value drops below the
alarm limit, the value returns to its normal color.
7.4.5 Audible alarms
If a sound has been selected in the setup dialog box, when any of the above error types
occurs, an audible alarm sounds. The audible alarm repeats until the alarm condition has
been acknowledged. Each type of alarm (stop, warning, alarm) has its own sound. If
multiple alarms are present, only the highest-level alarm sounds.
To Next Page
Loading...
