Page 50
Run Modes
4.2 Accessing run modes
To access run modes, follow these steps:
1. At the home screen, touch the << icon to open the sliding toolbar.
2. Touch the run mode icon.
3. At the run mode dialog box, touch the radio button that represents the desired run
mode. See
Figure 24.
Note: Normal operating modes do not apply when "Control with digital inputs" is selected in the TOC
setup dialog box under the Digital Control tab. Refer to Digital control tab, page 58.
4.3 Online TOC mode
In online TOC mode, the home screen highlights the TOC reading, with conductivity,
temperature, sample time, trend, and curve type displayed in smaller text. See Figure 25.
Figure 24 Run mode dialog box
Figure 25 Home screen, current tab, online TOC mode
To Next Page
Loading...
