Page 60
Setup
5.4 System
The system icon allows you to modify system settings for the analyzer.
5.4.1 General tab
Instrument name text box allows you to specify the analyzer name used by the system.
You may enter 1 to 13 alphanumeric or symbol characters. The default value is
“PAT700Sensor”.
Language drop down list box allows you to select the language to use for all your
interfaces. You may currently select English.
• Selecting a different language changes the operating system setting in the registry.
When the system is rebooted, the new setting takes effect. The default selection is
English.
• For Japanese and Chinese translations, this control is disabled. In these cases, the
appropriate language will be loaded at the factory.
Return icon returns you to the setup dialog box and saves the changes. Any changes
are noted in the audit trail. All changes take effect on the next change of state.
Figure 37 System settings dialog box, general tab
To Next Page
Loading...
