Chlorine, Total
Chlorine, Total
ChlorineTot_PT_ULow_DPD_Eng_Ody.fm Page 3 of 8
13. Flush the Pour-Thru
Cell with at least 50 mL of
deionized water
immediately after use.
1. Touch
Hach Programs.
Select program
86 Chlor. Total ULR.
Touch
Start.
2. Make sure that the
reagent blank setting is
off. Touch
Options, then
Reagent Blank. Touch Off.
Touch
OK and Return.
3. Install the Pour-Thru
Cell and cell adapter in
the sample cell
compartment. Flush with
50-mL of deionized
water.
4. Collect about 100 mL
of deionized or tap water
in a clean, 250-mL beaker.
Determining the Reagent Blank Value
Hach Programs
Options
OK
Reagent Blank:
Off
To Next Page
Loading...
