9705 - Initialization 15 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
2.4 Electrical Connections
2.4.1 USB Communications
On the back of the 9705, shown in Figure 2-2, connect a computer or data device using the
following connectors:
• USB Client
• USB Host (for services updates only, not data transfer)
2.4.2 Power Cable
Connect the end of the power cord to the male socket on the rear panel of the 9705. Plug the
power cord into an appropriately rated AC line.
Attach the AC power cable supplied with the unit to the AC power socket. Do not turn the power
on until installation is complete.
CAUTION:
The round connection slot left of the AC power is for use by service personnel only. Do not
operate the unit with this cover removed.
2.5 Syringe Installation
The syringe is located on the right side of the 9705 as shown in Figure 2-3.
Fig 2-3 : 9705 Right Side View
Syringe access
To Next Page
Loading...
