24 of 82 System Setup - 9705
KSS - March 2006 - Edition 1
Operator Manual HIAC
These functions are listed in Table 3-1.
3.2 Changing the Language
1) From the Main Screen, select the Setup icon > System icon to invoke the System
Settings screen, shown in Figure 3-3.
Table 3-1 : Settings Button Functions
Icon Name Functions Relevant Sections
Sample Set sample parameters, including:
• Number of runs
• Sample Volume
•Tare
• Multi-Stroke Tare
• Dilution Factor
• Stir speed
“Changing Sample Parameters” on page 49
System • Change date and time
• Setting the backlight timeout
• Changing the display language
• “Changing the Date and Time” on page 26
• “Setting Backlight Timeout” on page 29
Syringe • Changing syringe size
• Changing flow rate
• “Changing the Syringe Size” on page 49
• “Setting Flow Rate” on page 28
Display Setting these parameters:
• Count display
• Scaling
• Number of runs to display
“Display Settings” on page 25
Printer • Configuring automated print com-
mands
• Manually feeding paper out of the
printer
• “Automatically Printing Results” on page 58
• “Loading Printer Paper” on page 19
Sizes • Adding size channel to monitor
• Editing existing size channel
• Deleting size channel
• “Adding a Size” on page 27
• “Editing a Size” on page 28
• “Deleting a Size” on page 28
Security • Enabling or disabling password
protection
• Changing the password
“Password Protection” on page 52
Sound • Setting sound effects for actions
and errors
• Setting system volume
“Configuring Sounds” on page 31
Load Defaults Loads the default settings for the
9705
N/A
Save Defaults Saves the current settings as the
default settings
N/A
To Next Page
Loading...
