9705 - System Setup 31 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
3.8 Configuring Sounds
To change the sound effects when actions occur:
1) From the Main Screen, select the Setup icon > Sounds icon to invoke the Sound
Settings screen, shown in Figure 3-9.
2) Make changes by touching a field to invoke a dropdown menu, touching the desired
choice to highlight it. Descriptions of fields and available choices are listed in Table 3-3.
Fig 3-9 : Sound Settings Screen
Table 3-3 :
Sound Tab Field Descriptions
Field Description Entries
User Feedback Sound effect for any action taken by the user • None
• Click
•Beep
Error Sound effect to indicate a critical system error that
has stopped the sampling process
•None
• Alarm1
• Alarm2
•Beep
Warning Sound effect to indicate a non-critical system error
which does not impede sampling but should be
checked, such as low printer paper
•None
• Alarm1
• Alarm2
•Beep
Volume Sets volume of all sounds
o
e:
Mute turns all sounds off completely.
•Mute
•Low
• Medium
• High
To Next Page
Loading...
