Hach HIAC 9705 - Fig 3-20: Turn the Handle Counterclockwise; Fig 3-21: Align the Adapter

38 of 82 System Setup - 9705
KSS - March 2006 - Edition 1
Operator Manual HIAC
6) Prepare the large volume adapter by turning the handle fully counterclockwise. This
opens the internal O-ring.
7) With the O-ring opened, align the adapter as shown in Figure 3-21, such that the peg
on the bottom aligns with the threaded hole in the bottle dock. Position the hole in the
bottom of the adapter directly over the short needle.
Fig 3-20 : Turn the Handle Counterclockwise
Fig 3-21 : Align the Adapter
hold this piece still