9705 - System Setup 39 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
CAUTION:
Do not damage the tip of the needle. Feed the needle CAREFULLY into the hole adjacent to
the adapter peg.
8) Fully seat the adapter over the short needle such that the bottom sits firmly on the base
of the bottle dock. Turn the adapter handle fully clockwise. This closes the internal
O-ring.
9) Pass the adapter tubing through the center hole of the bottle guide and install the bottle
guide as shown to secure the adapter in place. Use the 20 mL guide for this purpose.
Fig 3-22 : Seat the Adapter
To Next Page
Loading...
