Hach HIAC 9705 - Fig 3-31: Flat End; Fig 3-32: Sharp End; Fig 3-33: Slide Ferrule Pieces Onto Tubing

9705 - System Setup 45 of 82
KSS - March 2006 - Edition 1
HIAC Operator Manual
3) Orient the two ferrule pieces as shown and slide them onto the tubing in the order
shown.
Fig 3-31 : Flat End Fig 3-32 : Sharp End
Fig 3-33 : Slide Ferrule Pieces onto Tubing
Sharp end
Flat end