66 of 82 Diagnostics and Troubleshooting - 9705
KSS - March 2006 - Edition 1
Operator Manual HIAC
When a warning condition exists, such as a value out of range, a yellow Caution! triangle
appears on the screen. Press the yellow triangle or the Diagnostics icon, shown in Figure 6-
1, to invoke the Diagnostics screen, shown in Figure 6-2.
While the 9705 has a limited number of user-serviceable parts, the Diagnostics tab lists
information that may be useful either to the end user or Technical Support.
The Diagnostics screen is divided into four tabs:
•Status
• Factory
• Calibration
• Sensor Log
All Diagnostics tabs allow two functions:
• Printing the information displayed
• Closing the Diagnostics tab via the Return icon
All information is read-only and cannot be edited.
6.3.1 Status Tab
The Status tab, shown in Figure 6-3, lists the information in Table 6-3.
Fig 6-2 : Diagnostics Screen
To Next Page
Loading...
